Changing Your Schuberth Motorsport Helmet Visor: A Comprehensive Guide
Schuberth helmets are renowned for their quality and innovative features, including their quick-release visor system. Whether you're replacing a scratched visor, upgrading to a darker tint, or simply want to change up your look, switching out your Schuberth visor is a simple process. This guide will walk you through the steps, ensuring a smooth and effortless experience.
Essential Tools
- Your new Schuberth motorsport visor
- A 4mm Allen key
Steps to Change Your Visor
1. Prepare Your Helmet
- Locate the visor release lever on the side of your helmet. It's a small, clear lever situated at the the bottom of the visor.
- Pull the lever upwards, carefully lifting the visor from the helmet.
2. Remove the Old Visor
- With the lever engaged, gently lift the visor upwards and away from the helmet release.
- Get your Allan key and slowly un-do the screws on the sides of the helmet. Set these aside for later.
- Remove the visor, please note not to put the visor face down.
3. Install the New Visor
- Align the new visor with the helmet, ensuring the tabs on the visor align with the corresponding slots on the helmet shell.
- Slowly insert the two pinlock prongs into place and screw the bolt to 50% tension. Repeat on the other side.
- Once the bolts are both in place, screw them until taught.
- Check that the visor is securely attached by attempting to lift it. It should be firmly in place.
4. Secure the Visor
- With the visor installed, push the release lever downwards to lock the visor in place.
- To ensure a secure fit, give the visor a slight tug to confirm it's properly locked.
Important Considerations
- Always consult the Schuberth helmet manual for specific instructions regarding your helmet model.
- Ensure that the new visor is compatible with your helmet model.
- When installing the new visor, apply gentle pressure to ensure a secure fit without damaging the helmet or visor.
Conclusion
Changing your Schuberth helmet visor is a straightforward process. By following these steps, you can easily replace your old visor, upgrade to a new tint, or simply refresh the look of your helmet. Remember to always consult your helmet manual for specific instructions and ensure the new visor is compatible with your helmet model.
FAQs
Can I use any Schuberth visor on my helmet?
All Schuberth motorsport visors are universal and can be used on any motorsport or karting helmet. Schuberth Motorcycle visors however will not fit on a motorsport helmet.
How often should I replace my helmet visor?
It's recommended to replace your helmet visor every year, especially if it's scratched, faded, or damaged. This ensures optimal visibility and safety.
To help longevity of your visor, you may consider adding tear offs for protection.
Can I clean my helmet visor?
Yes, you can clean your helmet visor with a microfiber cloth and mild soap and water. Avoid using harsh chemicals or abrasive materials.